Unable to set Static IP Business FiOS 5/5 w/5IP's

[Phylum]

Hi All. I'm new to FiOS but not necessarily new to networking etc. So let me humble myself because I'm no guru!

I've scanned the forums but have not come up with a solution that works. To put it simply: I want to use one or more of my static IP's available. Currently, I can only get the Actiontec router to use one of my 5 static IP's and that's it. Allow me to explain my setup...

CAT5 from ONT to WAN Port On Actiontec MI424-WR router running firmware 4.0.16.1.45.160.27.
--LAN Port 1 to Netgear Switch Port 8
--LAN Port 2 to Windows 2000 PC

Netgear switch
--LAN Port 8 to Actiontec Port 1
--LAN Port 4 to Linux Desktop
--LAN Port 1 to Linksys WRT54G Internet/WAN Port

Linksys WRT54G running firmware 2.04.4
--Internet/WAN Port to Netgear switch Port 1
--LAN Port 1 to Windows XP Laptop

Lets pretend Verizon gave me the following information:
IP Range: 1.1.1.12 - 1.1.1.16
Subnet: 255.255.255.0
Gateway: 1.1.1.1
DNS 12.12.12.9 & 14.14.14.3

I've tried multiple combinations w/o any success, including switching the WRT54G from Gateway to Router and back. I can only get 1 real static IP (1.1.1.12) online which is the Actiontec. No other machine on the network, no matter where its connected can access the Internet unless its DHCP:
-Actiontec to ONT,
-Netgear to Actiontec,
-Linksys to Netgear to Actiontec;
-Netgear to Linksys to ONT;
-Linksys to ONT,
-ONT to Netgear switch (auto sensing upload)

Am I just being stupid?
Have I over complicated the situation because I'm confused/lost now?
Can someone shed any additional light?

Any and all criticism, constructive or otherwise, appreciated.